document number: 93583 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 02-jul-10 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 1 standard diodes, 600 a (super magn-a-pak power modules) vskd600 series vishay semiconductors features ? high current capability ? high surge capability ? high voltage ratings up to 2000 v ? 3000 v rms isolating voltage with non-toxic substrate ? industrial standard package ? ul approved file e78996 ? compliant to rohs directive 2002/95/ec typical applications ? rectifying bridge for large motor drives ? rectifying bridge for large ups electrical specifications product summary i f(av) 600 a type modules - diode, high voltage super magn-a-pak major ratings and characteristics symbol characteristics values units i f(av) 600 a t c 100 c i f(rms) 942 a t c 100 c i fsm 50 hz 19 000 a 60 hz 20 100 i 2 t 50 hz 1805 ka 2 s 60 hz 1683 i 2 ? t 18 050 ka 2 ? s v rrm range 800 to 2000 v t stg , t j range - 40 to 150 c voltage ratings type number voltage code v rrm , maximum repetitive peak reverse voltage v v rsm , maximum non-repetitive peak reverse voltage v i rrm maximum at t j maximum ma vskd600.. 08 800 900 50 12 1200 1300 16 1600 1700 20 2000 2100
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 93583 2 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 02-jul-10 vskd600 series vishay semiconductors standard diodes, 600 a (super magn-a-pak power modules) forward conduction parameter symbol test conditions values units maximum average forward current at case temperature i f(av) 180 conduction, half sine wave 600 a 100 c maximum rms forward current i f(rms) 180 conduction, half sine wave at t c = 100 c 942 a maximum peak, one-cycle forward, non-repetitive surge current i fsm t = 10 ms no voltage reapplied sinusoidal half wave, initial t j = t j maximum 19.0 ka t = 8.3 ms 20.1 t = 10 ms 100 % v rrm reapplied 16.2 t = 8.3 ms 17.2 maximum i 2 t for fusing i 2 t t = 10 ms no voltage reapplied 1805 ka 2 s t = 8.3 ms 1683 t = 10 ms 100 % v rrm reapplied 1319 t = 8.3 ms 1230 maximum i 2 ? t for fusing i 2 ? t t = 0.1 ms to 10 ms, no voltage reapplied 18 050 ka 2 ? s low level value of threshold voltage v f(to)1 (16.7 % x ? x i f(av) < i < ? x i f(av) ), t j = t j maximum 0.70 v high level value of threshold voltage v f(to)2 (i > ? x i f(av) ), t j = t j maximum 0.77 low level value of forward slope resistance r f1 (16.7 % x ? x i f(av) < i < ? x i f(av) ), t j = t j maximum 0.28 m ? high level value of forward slope resistance r f2 (i > ? x i f(av) ), t j = t j maximum 0.25 maximum forward voltage drop v fm i pk = 1800 a, t j = 25 c, t p = 10 ms sine pulse 1.45 v blocking parameter symbol test conditions values units rms insulation voltage v ins t = 1 s 3000 v maximum peak reverse and off-state leakage current i rrm t j = t j maximum, rated v rrm applied 50 ma thermal and mechanical specifications parameter symbol test conditions values units maximum junction operating and storage temperature range t j , t stg - 40 to 150 c maximum thermal resistance, junction to ca se per junction r thjc dc operation 0.065 k/w maximum thermal resistance, case to heatsink r thc-hs 0.02 mounting torque 10 % smap to heatsink a mounting compound is re commended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound. 6 to 8 nm busbar to smap 12 to 15 approximate weight 1500 g case style see dimensions - link at the end of datasheet super magn-a-pak
document number: 93583 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 02-jul-10 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 3 vskd600 series standard diodes, 600 a (super magn-a-pak power modules) vishay semiconductors note ? the table above shows the increment of thermal resistance r thjc when devices operate at different conduction angles than dc fig. 1 - current ratings characteristics fig. 2 - current ratings characteristics fig. 3 - forward power loss characteristics fig. 4 - forward power loss characteristics ? r thjc conduction conduction angle sinusoidal conduction rectangular conduction test conditions units 180 0.009 0.006 t j = t j maximum k/w 120 0.011 0.011 90 0.014 0.015 60 0.021 0.022 30 0.037 0.038 80 90 100 110 120 130 140 150 0 100 200 300 400 500 600 7 00 30 60 90 120 180 maximum allowable case temperature (c ) conduction angle average forward current (a) vskd600.. series r (dc) = 0.065 k/w thjc 80 90 100 110 120 130 140 150 0 200 400 600 800 10 00 dc 30 60 90 120 180 maximum allowable case temperature (c ) conduction period average forward current (a) vskd600.. series r (dc) = 0.065 k/w thjc 0 100 200 300 400 500 600 700 0 100 200 300 400 500 600 average forward current (a) rms limit maximum average forward power loss (w) conduction angle 180 120 90 60 30 vskd600.. series per junction t = 150c j 0 100 200 300 400 500 600 700 800 900 1000 0 200 400 600 800 10 00 dc 180 120 90 60 30 average forward current (a) rms limit maximum average forward power loss (w) conduction period vskd600.. series per junction t = 150c j
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 93583 4 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 02-jul-10 vskd600 series vishay semiconductors standard diodes, 600 a (super magn-a-pak power modules) fig. 5 - maximum non-repetitive surge current fig. 6 - maximu m non-repetitive surge current fig. 7 - forward power loss characteristics fig. 8 - forward power loss characteristics 4000 6000 8000 10000 12000 14000 16000 18000 110100 peak half sine wave forward current (a) number of equal amplitude half cycle current pulses (n ) vskd600.. series per junction initial t = 150c @ 60 hz 0.0083 s @ 50 hz 0.0100 s at any rated load condition and with rated v applied following surge. rrm j 4000 6000 8000 10000 12000 14000 16000 18000 20000 0.01 0.1 1 peak half sine wave forward current (a ) pulse train duration (s) maximum non repetitive surge curren t initial t = 150c no voltage reapplied rated v reapplied rrm versus pulse train duration . j vskd600.. series per junction 0 255075100125150 maximum allowable ambient temperature (c) r = 0 . 0 2 k / w - d e l t a r th s a 0 . 0 4 k / w 0. 06 k /w 0 . 0 8 k / w 0 . 1 2 k / w 0. 16 k / w 0 . 2 5 k / w 0 . 3 5 k / w 0 . 5 k / w 0 200 400 600 800 1000 0 200 400 600 800 1000 total rms output current (a) maximum tot al forward power loss (w) vskd600.. series per junction t = 150c j 180 (sine) dc 0 25 50 75 100 125 150 maximum allowable ambient temperature (c ) r = 0 . 0 1 k / w - d e l t a r t h s a 0 . 0 2 k / w 0 .0 3 k / w 0 . 0 4 k / w 0 . 0 5 k / w 0 . 0 8 k / w 0 . 1 2 k / w 0 . 2 k / w 0 500 1000 1500 2000 2500 3000 0 200 400 600 800 1000 1200 total output current (a) maximum total power loss (w) 180 (sine) 180 (rect) 2 x vskd600.. series single phase bridge connected t = 150c j
document number: 93583 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 02-jul-10 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 5 vskd600 series standard diodes, 600 a (super magn-a-pak power modules) vishay semiconductors fig. 9 - forward power loss characteristics fig. 10 - thermal impedance z thjc characteristic 0255075100125150 maximum allowable ambient temperature (c ) r = 0 . 0 1 k / w - d e l t a r 0 . 0 2 k / w 0 . 0 3 k / w 0 . 0 5 k / w 0 . 0 8 k / w 0 . 1 2 k / w 0 . 2 k / w t h s a 0 500 1000 1500 2000 2500 3000 3500 4000 4500 0 300 600 900 1200 1500 1800 total output current (a) maximum total power loss (w) 120 (rect) 3 x vskd600.. series three phase bridge connected t = 150c j 0.001 0.01 0.1 0.001 0.01 0.1 1 10 100 square wave pulse duration (s) thjc transient thermal impedance z (k/w ) vskd600.. series per junction steady state value: r = 0.065 k/w (dc operation) thjc
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 93583 6 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 02-jul-10 vskd600 series vishay semiconductors standard diodes, 600 a (super magn-a-pak power modules) ordering information table circuit configuration circuit description circuit configuration code circuit drawing two diodes doubler circuit d links to related documents dimensions www.vishay.com/doc?95088 1 - module type 2 - circuit configuration d = 2 diodes in series (see circuit configuration table) 3 - current rating 4 - voltage code x 100 = v rrm (see voltage ratings table) device code 13 24 vsk d 600 - 20 + - ~ 1 2 3
document number: 95088 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 20-mar-08 1 super magn-a-pak diode outline dimensions vishay semiconductors dimensions in millimeters (inches) 52 (2.05) 60.0 (2.36) 48.0 (1.89) 31.0 (1.22) 50.0 (1.97) 44.0 (1.73) m10 fast-on tabs 2.8 x 0.8 (0.11 x 0.03) 20.1 (0.78) 36.4 (1.14) 4.5 (0.20) 28.0 (1.10) 26.0 (0.98) 26.0 (0.98) 112.0 (4.41) 124.0 (4.88) 149.0 (5.67) 1.0 (0.039) 32 1
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
